Main Facilities Small Wind Tunnel equipment(*); Large surface plate(4mx6m); Layout machine; Non-Contact 3D Measurement equipment; Autoclave(*); Milling cutter; Lathe; Large press brake; and Other machine tools. Items with (*): followed by details below; Our Wind Tunnel (WT) was made and has been modified especially for racing car research and development. That has moving-belt running at Max.40m/s, with open measuring area, which allow you to come up to observe directly the testing model under the WT testing. We promise your data is kept highly confidential. Your testing data can be uploaded directly to your own PC, with no data stored in our WT system. New SHI-DEN: under WT testing Same as left "MC041": under WT testing "GC21": under WT testing provided by KEIO Univ. Electric Vehicle Lab. Open measuring area with moving ground Jet shape Width 1.0m * Height 0.7m Jet length 1.45m Maximum speed 1.5m/s～42m/s Type Closed-Circuit Test section Open jet with a moving belt Contraction ratio 5 Maximum model weight 100kg Variability of the model angle Pitch/Automatic control Roll/Free choice Yaw/0°～5° Lord measurements Drag(Body&Tyres) Down Force Pitching Moment Wind Tunnel Rental Information Division in Charge: Development Div. / Engineering Design The autoclave is a device to shape carbon-fiber to fully activate the high-potential characteristics of it. The autoclave itself is controlled by computer, but they need the craftsmanship by experienced craftsman’s' hands to provide you with the highest quality products. We Mooncraft have developed the hands-on craftsmanship throughout designing and manufacturing racing cars over 20 years. autoclave * Specification Working dimensions Diameter 1500mm * Length 3000mm Maximum temperature 180℃ Maximum pressure 9 pa Division in Charge: Development Div. / Composite materials